User Manual

Axell BSR 3308-PS NFPA
Product Description and User’s Manual
30 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
4.2.3 CMU Pane and Tabs
When the CMU item is selected in the Topology Tree, the following menu items are
available.
Item
Description / Values
Axell-CMU Info Shows Repeater level information such as SW and HW
versions and identification number. In addition, enables
setting minimum alarm levels. See section
5.2.1.
Communication
Configuration
Used to set local IP communication and SNMP
destinations. See section
4.3.
Alarms Log Log of past and current system events. See section
6.2.2.2
Axell-CMU Alarms
System alarms. See section
6.4
External Alarms Used to define any connected external alarms. See
section
4.4
Axell-CMU SW Upgrade
Options for CMU software upgrade. See section
5.3.1.
4.3 Configuring the RF Parameters and Sub-band
The RF configuration procedure consists of two simple phases – one of which is optional:
• Setting RF parameters – optional.
• Defining the sub-band
4.3.1 Reducing the Max Output Power and Gain – Optional
The repeater is automatically configured by the SALC mechanism for optimal coverage
and maximum power (see section
1.5.1 for more information). If required, the user can
reduce maximum output power and/or gain according to the instructions given in this
section in order to reduce the coverage area or resolve issues such as isolation.