User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
26 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
6. The Internet Protocol Version 4 (TCP/IPv4) Properties dialog appears.
NOTE: The Repeater is supplied with the default IP address 192.168.1.253.
7. Assign your computer an IP address in the same subnet, in order to communicate
with the unit.
• In the IP address area:
• Enter the IP address 192.168.1.x, where ‘x’ can be any number between 2
and 250 inclusive. For example, (192.168.1.9)
• Define the subnet mask as shown (255.255.255.0)
• Click OK. The computer communication parameters are now defined and
you can open a session to the Repeater.