User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
20 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
3.9.2 BSR 3308-PS NFPA Power Connection
NOTE: BSR 3308-PS NFPA Repeaters may be (if required) connected to the power source via a
UPS.
3.9.2.1 For AC repeater models:
1. Locate the AC power outlet, with at least a 6A slow blow fuse.
2. Connect the BSR 3308 AC/DC converter power cable to the UPS.
3. Connect the UPS alarms to the Fire Department Control Box. Refer to the
instructions in the UPS Installation Guide provided with the UPS unit.
NOTE: System power-up may take up to a few minutes.
Figure 3-7. NFPA UPS Power Connections
DC Input connection:
• AC model – from
premounted AC/DC
Converter.
• DC model - from -48VDC
trickle charge battery