User Manual
Table Of Contents
- 1 Introduction
- 2 Antenna Requirements
- 3 Installing the Repeater
- 4 Initial Setup and Commissioning
- 5 Administration
- 6 Maintenance and Troubleshooting
- Appendix A: Specifications
Axell BSR 3308-PS NFPA
Product Description and User’s Manual
12 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
3.4 Unpacking
Upon receiving the BSR 3308 unit, perform the following:
• Examine the shipping container for damage before unpacking the unit.
• Perform a visual inspection to reveal any physical damage to the equipment.
• Verify that all of the equipment (listed below) is included (see also the following
page). Otherwise contact Axell Wireless.
BSR 3308-PS NFPA Repeater
Ethernet cross-cable
CD with documentations
Mounting Bracket.
AC models – with AC/DC premounted
converter and AC outlet power cable.
DC models – no converter, with DC
source power cable.
AC outlet power cable
DC source power cable P/N
40WVC70900
Additional (supplied) installation
components:
No
Description
No.
1 Flange nut, 5/16 4
2
Wedge anchor, ∅ 12 x 65
mm
4
3 Hex washer head screw,
∅ 8 mm
4
4 Washer, spring, ∅ 8 mm 4
5 Washer, flat, ∅ 8 mm 2
6 Clamp 2
7 Washer, flat, ∅ 28 mm 4
8 Screwdriver, Allen 1
Figure 3-1. Installation Components