User Manual

Axell BSR 3308-PS NFPA
Product Description and User’s Manual
2 Doc PN 4000004131 Rev. 2.7 © Axell Wireless Ltd
1.1 Features
• ESMR Band Selective Mini-repeater
• Single frequency block in the ESMR band, where the block is:
• Independently tunable across the entire 800 MHz SMR band
• Selectable bandpass filter to one of the following: 3MHz, 10MHz or 18 MHz
• RF gain: 85 dB
• Composite power
• FCC Composite Power: DL 33dBm, UL 27dBm (in accordance with FCC product
measurements)
• IC Rated Power: DL 30dBm, UL 25dBm (the rated power is equivalent to
the Pmean power measured with a two tone test in accordance with
Industry Canada procedures).
• .SmartALC™ technology - automatically sets optimum gain and in addition:
• Prevents oscillations and balances coverage
• Shut down the BDA if high input signal is detected
• Ensures transparent network operation
• Built-in power measurement and RSSI indication.
• Front panel LED provides received signal strength level indication to help align the
donor antenna for optimal performance.
• High linear amplification, high spectral purity and highly accurate frequency selection
• Excellent out-of-band interference prevention
• IF-SAW filtering – tunable, sharp out-of-band rejection
• Built-in power measurement and RSSI indication
• For NFPA models, designed to meet NFPA requirements:
• For AC models – requires UPS Backup battery (not supplied): 12/24 hours
• For DC models – requires ±48VDC trickle charged battery (not supplied)
• All models - dry-contacts alarms to the Fire Control Panel: PS (UPS)
alarms, Repeater Summary alarm and Antenna alarm.
• Management – Web GUI setup and management via an Ethernet connection