User's Manual

AXELL BSF-4004 BSF0038 SERIES REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
6.4.1 Control Module LEDs
The Control Module has four LEDs which give information regarding the
status of the BSF-4004.
If the BSF-4004
is configured for Ethernet communication the two LEDs
Modem Power and Modem Status do not fill any function and can be
disregarded.
Blue LED - Login
Quick flash
Control Module switched on, someone logged in locally and/or remotely
Off (except for a quick flash every
10th second)
Control Module switched on, no one logged in
Off (permanent)
Control Module switched OFF
Red LED - Status
Quick flash Control Module switched on, one or more errors/alarms detected
Off (except for a quick flash every
10th second)
Control Module switched on, status OK
Off (permanent) Control Module switched off
Green LED – Modem Power
On Modem Power is on
Off Modem Power is off
Green LED – Modem Status
On Depending on type of call:
Voice call: Connected to remote party
Data call: Connected to remote party or exchange of parameters while
setting up or disconnecting a call
Flashing
(irregular)
Indicates GPSR data transfer. When a GPRS transfer is in progress the LED
goes on within 1 second after data packets were exchanged. Flash duration
in approximately 0.5s.
75ms on/75ms off/75ms on/3s off One or more GPRS contexts activated
75ms on/3s off
Logged to network (monitoring control channels and user interactions). No
call in progress
600ms on/600ms off
No SIM card inserted, or no PIN entered, or network search in progress, or
ongoing user authentications, or network login in progress
Off Modem is off
Modem Status
Modem Power
Status
Login
© Axell Wireless Ltd Doc. No. PN 4004 BSF0038 Series-UM Rev. 1.0 51