User's Manual
Table Of Contents
- FCC Part 15
- Unauthorized Changes to Equipment
- FCC RF Exposure Limits
- Antenna Installation
- Compliance with FCC deployment rule regarding the radiation of noise
- 1 Introduction
- 2 Antenna and Repeater Installation Requirements
- 3 Installation
- 4 BSF-4004 Commissioning
- 5 BSF-4004 Full GUI Description
- 6 Monitoring, Fault Sourcing and Maintenance
- Appendix A - Specifications
- Appendix B - F/O Cleaning Procedure
AXELL BSF-4004 BSF0038 SERIES REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
6.4 Module LEDs
This section describes the LEDs of the internal modules. The modules are accessed if the remote is
opened. An example of the BSF-3604 Dual-band, dual-service antenna model is given below:
Figure 6-7: Dual band Dual Service Antenna Model
F/O converter module LEDs,
see 5.3.2.2
Controller module LEDs,
see 5.3.2.1
Power module LEDs,
see 5.3.2.3
50 Doc. No. PN 4004 BSF0038 Series-UM Rev. 1.0 © Axell Wireless Ltd