User's Manual

Table Of Contents

AXELL BSF-4004 BSF0038 SERIES REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

6 Monitoring, Fault Sourcing and

Maintenance

BSF-4004 provides the following monitoring and fault sourcing options:

• Web GUI Home screen Advanced mode – shows general status of system and components

• Web GUI Logs screen – provides logs of faults and operations

• Module LEDs – can be seen locally when opening the Repeater

This chapter describes these fault sourcing tools. Be sure to review the Cautions and General

Statements below.

6.1 Cautions and General Statements

• The system normally operates without any operator intervention or maintenance. If in the

unlikely event of any unit failure, the faulty repeater should be replaced. A failed unit can be

removed and replaced with a spare while the rest of the system (other repeaters) is still operating.

However, the power supply of the failed repeater should be isolated from the power before

anything is replaced.

• In the event of a malfunction in the system, the status of the antenna systems as well as the

continuity of the cabling should be checked before replacing any modules within the repeater.

• In the event of a failure Axell Wireless’ support service should be contacted for advice on a

possible module replacement or other action to be taken.

• If a shipment of a repeater back to Axell Wireless is made within the period of guarantee the

original packing must be used.

• Component Replacement - None of the modules in the repeater can be replaced without removing

the repeater from its mounting and opening the cover of the repeater.

• Product Disposal - Disposal of this product must be handled according to all national laws and

regulations. For detailed information regarding materials, please refer to Axell Wireless.

•

CAUTION!! Please be aware that the equipment may, during certain conditions become very

warm and can cause minor injuries if handled without any protection, such as gloves.

•

CAUTION!! Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to local laws and instructions.