User's Manual

Table Of Contents

AXELL BSF-4004 BSF0038 SERIES REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

5 BSF-4004 Full GUI Description

This chapter provides a detailed description of the complete BSF-4004 Web GUI that is accessed

when a direct session is opened to the BSF-4004.

When an indirect session (via OMU II) is opened to the BSF-4004, only the BSF-4004 Main window

is available. The additional options are available when a direct session is opened to the BSF-4004

(not via OMU II).

This chapter describes how to open local and remote direct sessions to the Remote and the available

options when such a session is opened.

5.1 Opening a Direct Web Session

You may open a direct Web session to the BSF-4004 by connecting to the unit either:

A. Locally

B. Remotely via an Ethernet/modem connection – requires to unit to be connected to the

network.

5.1.1 Connecting Locally

NOTE: This connection requires downloading the USB driver from the provided setup disk (or

connection to the internet, where the driver is automatically loaded).

To open a local session:

1. Open the BSF-4004 cover

• Connect to the USB/Ethernet port on the Controller module. If the USB driver is not

already installed on your laptop, the system will search for the driver on the provided

setup disk or on the internet (if a network connection is available).

• Run a browser and login according to the following section.

Figure 5-1: BSF-4004 Controller Module Connection

USB cable

Ethernet