User's Manual

Table Of Contents

AXELL BSF-4004 BSF0038 SERIES REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

Column Description

Pos

Each Rack corresponds to an OMU unit whereas each Slot

corresponds to an Opto-Module. Slots are numbered according to their

position in the OMU Chassis (numbered left to right).

Select All Batch selection options:

- mark all remotes for UL opto-adjustment.

- mark all remotes for DL opto-adjustment.

- mark all remotes for DL and UL adjustment.

Node Node list number and identification (e.g. AHFK)

Status Displays an Error if process failed. If successful the pilot tone used

and the adjustment level will be displayed.

Resulting Attenuation Compensation level used for the opto-module (in dB).

9. Mark the check-boxes corresponding to the remotes (each connected to the designated Opto-

module/Opto-Splitter) to which to perform the adjustment.

10. OLA (DL/UL) may be performed on each node individually (or a batch) or on all nodes at once

by marking the checkbox next to the desired corresponding Opto-module and clicking Adjust.

To easily mark all checkboxes mark the checkbox named OLA.

NOTE: The process may take several minutes depending on the size of the system and remote

distance.