User's Manual

Table Of Contents

AXELL BSF-4004 BSF0038 SERIES REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

3.7.2.3 230 VAC Power Source

Connect the power cable to the plinth as show below:

• Phase linked to the brown cable

• Neutral linked to the blue

• Ground to the yellow/green. See illustration below.

Figure 3-17: 230 VAC Power Connections

3.7.2.4 115 VAC Power Source

Cable requirements:

• Cable should be NRTL (safety) approved with a minimum of 14AWG (2.5mm) per conductor.

• For safety, the GND cable must be 10mm longer than the Phase and Neutral cables.

Connect the power cable to the plinth as show below:

• Phase linked to the Black cable

• Neutral linked to the White

• Ground to the Green where for SAFETY, the GND cable must be 10mm longer than the Phase

and Neutral cables.

Figure 3-18: 115VAC Power Connections