User's Manual

Table Of Contents

AXELL BSF-4004 BSF0038 SERIES REPEATER

PRODUCT DESCRIPTION AND USER’S MANUAL

6. As the bolt pulls its way in, the sides of the anchor section are forced outwards, gripping the

surrounding surface.

Figure 3-9: Anchor Sides Pushed Outwards.

7. Once all four fixings are in place, carefully withdraw the four bolts.

Figure 3-10: Withdraw Bolts.

8. Align repeater with the four fixings. Great care should be exercised here as the repeater is very

heavy. Once repeater is held in the chosen position (a suitably rated heavy duty scissor lift

table/trolley may be suitable for this operation). Carefully insert the fixing bolts through the

mounting lugs of the Repeater and into the sleeve/anchor sections of the fixing in the wall and

tighten the bolts.

Figure

3-11: Mount Repeater

Align Repeater

and Secure Bolts