User's Manual
Table Of Contents
- FCC Part 15
- Unauthorized Changes to Equipment
- FCC RF Exposure Limits
- Antenna Installation
- Compliance with FCC deployment rule regarding the radiation of noise
- 1 Introduction
- 2 Antenna and Repeater Installation Requirements
- 3 Installation
- 4 BSF-4004 Commissioning
- 5 BSF-4004 Full GUI Description
- 6 Monitoring, Fault Sourcing and Maintenance
- Appendix A - Specifications
- Appendix B - F/O Cleaning Procedure
AXELL BSF-4004 BSF0038 SERIES REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
• Fix bolts –f ix M6 Rawbolts or similar (50 to 75mm in length) into the wall at the dimensions as
illustrated in figure 1 below using equipment as specified by the fixing manufacturer. A
recommended method is set out below. Care must be taken to ensure the alignment of the four
fixings. A spirit level or plumb line should be used to ensure horizontal/vertical alignment.
Figure 3-4: Fixing Centres
368mm
378mm
Hole to take
M6 rawl bolt
Hole to take
M6 rawl bolt
189
mm 189mm
Centre Line of MBF
Hole to take
M6 rawl bolt
Hole to take
M
6 rawl bolt
© Axell Wireless Ltd Doc. No. PN 4004 BSF0038 Series-UM Rev. 1.0 3