User's Manual
Table Of Contents
- FCC Part 15
- Unauthorized Changes to Equipment
- FCC RF Exposure Limits
- Antenna Installation
- Compliance with FCC deployment rule regarding the radiation of noise
- 1 Introduction
- 2 Antenna and Repeater Installation Requirements
- 3 Installation
- 4 BSF-4004 Commissioning
- 5 BSF-4004 Full GUI Description
- 6 Monitoring, Fault Sourcing and Maintenance
- Appendix A - Specifications
- Appendix B - F/O Cleaning Procedure
AXELL BSF-4004 BSF0038 SERIES REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
3 Installation
3.1 Unpacking
Inspect the shipped material before unpacking the equipment, document any visual damage and
report according to routines.
A delivery of a repeater from Axell Wireless contains:
• Checklist with delivered items
• Repeater
• Mounting brackets
• 4 bolts for attaching repeater to mounting kit
• Cable cover
• Keys to repeater and insex tool for bolts
• Hose for fibre inlet
• CD containing User’s Manual and RMC
• Any other specifically ordered item
3.2 Mount the Repeater
You can mount the BSF-4004 Remote on a wall or in a 19” inch rack. The Repeater is delivered with
mounting brackets.
Mount the repeater in an accessible location and in a location that fulfils the environmental
requirements. Mounting must be tight to eliminate vibration.
Figure 3-1: Mounting bracket position for wall
mounting
Figure 3-2: Mounting bracket position for rack
mounting
© Axell Wireless Ltd Doc. No. PN 4004 BSF0038 Series-UM Rev. 1.0 1