User Manual

AXELL 3604 A284 SERIES UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
40 DOC PN 3604 A284 Series-UM © Axell Wireless Ltd
6.5.5 Modem Setup
NOTE: This section is relevant only if a modem is installed in the CSR repeater. If so, the SIM card
should already have been installed according to section 4.8.
The CSR can communicate over two types of modem: Packet Switched (GPRS, GSM etc.)
or Circuit Switched (PSTN/GSM). The available options depend on the modem type
installed in your unit.
Modem Setup Overview
1. The Hover on the Home page Title bar and choose Modem from the displayed icons.
The following dialog appears.
2. Verify that Remote Communication is ON.
3. Select the Device:Method – communication method. Only the options relevant to your
installed modem will be displayed. (STD:DTC = Standard AT:Data Call, ETH:TCP =
Ethernet:TCP connection)
4. Configure your communication method according to the relevant following section.
6.5.5.1 Packet Switched Modem Configuration (GSM/GPRS)
NOTE: In case the network connection is not performed properly (using GPRS), it is
necessary to telnet, SSH or serial into the controller and enter TRACE MODEM to see why
modem is not initialized (wrong / missing PIN, wrong APN etc).
 From the Remote communication menu, select ***: GPRS.
 In the GRPS area, enter the following:
 Access Point Name  
 Click Apply.