User Manual

AXELL 3604 A284 SERIES UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
32 DOC PN 3604 A284 Series-UM © Axell Wireless Ltd
5.3.1 Title Bar Menu Options
NOTE: These options are available by hovering over the Title bar of the main window.
The Menu Bar allows access to all configuration and commissioning options:
Item
Description
Home
This is the default welcome screen. It displays general status
information and provides the RF UL and DL channel configuration
options.
SNMP
SNMP agent configuration options. (Section 6.5.3.2)
Nodes
Not Applicable
External Alarms
Configure, activate and assign names to two external alarms.
(Section 6.5.1)
Logs
List of alarms and operations. Alarms are raised according to user
defined Thresholds in Alarm Threshold. (Section 8.1.1)
Alarm Thresholds
Define thresholds for all system alarms (alarms are displayed in
Logs).
(Section 8.1.2)
Date and Time
Configure the time stamp for dating CSR events. (Section 6.44)
System Information
Display CSR hardware and software identification information and
system performance parameters (CPU load average, memory
usage and network response time (ms)). (Section 8.1.4 )
Password
Change login password. (Section 7)
NOTE: It is highly recommended to change the login password.
Reboot
Soft restarts the CSR. (Section 7.2)
Ethernet
Define the IP Address and network parameters for direct remote
access via Ethernet. (Section 6.5.2)
Axell Shell
Command line used to communicate with the remote units. List of
commands can be found in the Common Commands and
Attributes document. (Section 7.3)
Communication
Configure modem parameters (if the unit supports a modem) and
view AEM Server IP (provided by AEM). (Section 6.5.5)