User Manual

AXELL 3604 A284 SERIES UHF REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
© Axell Wireless Ltd DOC PN 3604 A284 Series-UM Rev. 2.1 27
5 Login and GUI Navigation
This section describes how to open a session to the repeater, and provides a brief
description of the WEB GUI and describes the initial setup procedures.
5.1 Opening a Local Web Session to the Repeater
5.1.1 Connect the Repeater to the Computer
Connect computer to the Repeater Ethernet connection
Using the supplied Ethernet cable, connect either to the internal Ethernet port (located
internally at the side of the Controller).
The following figure shows an internal ETH connection  to the side of the controller.
Figure 5-1. Connection to the internal Ethernet port