User Manual

AXELL MBF MULI-BAND FIBRE REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
38 © Axell Wireless Ltd
7
7
.
.
4
4
C
C
o
o
m
m
m
m
u
u
n
n
i
i
c
c
a
a
t
t
i
i
o
o
n
n
v
v
i
i
a
a
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
M
M
o
o
d
d
e
e
m
m
There are two different ways of communication for a wireless (GSM) modem:
 Using data call / modem connection.
Note! This requires the SIM-card in the modem to be configured with data service.
 Using SMS to configure the repeater with simple text messages
Note! SMS functionality is not implemented in this SW release.
The Axell Element Manager always uses data call communication with the repeater, why all repeaters
being controlled by the AEM must have data service enabled on the SIM card.
Configuring the repeater to send alarms and reports via SMS it is still possible to establish data calls
to the repeater, as long as the SIM card is data service enabled.
7.4.1 Modem Configuration, not using GPRS
Select
“Configuration”
and
“Communication”
Select Data Call
Initialization string
Connect times
AEM addressed are
set via the AEM
Select Data Call
Set the modem initialization string. This string differs between networks.
Primary recommendation is AT+CBST=71,0,1;\Q3. If remote
communication cannot be established try 7,0,1 or 0,0,1 or 7,0,3. For more
information please refer to the section on Troubleshooting Remote
Communication.
Tick “Enable Automatic Modem Power Cycling” for the modem to be
power cycled once every 24 hours. Set the time at which the modem should
be tested. This function ensures that the repeater always is logged in to the
network.
2004-01-01