User Manual
Table Of Contents
- MBF, Multi Band Repeater
- Contact Information
- About This Manual
- For whom it is Intended
- Notice
- Confidential - Authorized Customer Use
- Disclaimer of Liability
- Warrantee
- Table of Contents
- 1 Introduction
- 2 Installation
- 3 Commissioning Advice
- 4 Setup
- 5 Troubleshooting
- 6 Maintenance
- 7 Modem Communication
- 8 Specifications
AXELL MBF MULI-BAND FIBRE REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
34 © Axell Wireless Ltd
Examples
LED 1 is flashing slowly, LED 2 – 4 are flashing slowly
(once every 10 seconds)
=> power supply unit is operating without problem
LED 1 is flashing slowly, one or two of the red LEDs
are flashing quickly
=> Input power is operating but there is a problem with
some of the other voltages
LED 1 is flashing slowly, all of the red LEDs are
flashing quickly
=> Input power is out and unit is operating on backup
battery
Input
Power
+6V +15V +28V
Input
Power
+6V +15V +28V
Input
Power
+6V +15V +28V