User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

6 Maintenance

Caution

Please be aware that the equipment may, during certain conditions become very warm and can

cause minor injuries if handled without any protection, such as gloves.

Caution

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to local laws and instructions.

This product is equipped with class 1 lasers, as per definition in EN 60825-1.

Caution

Un-terminated optical receptacles may

emit laser radiation. Do not stare into beam

or view with optical instruments.

6.1 General

The system normally operates without any operator intervention or maintenance. If in the unlikely event of

any unit failure, the faulty repeater should be replaced. A failed unit can be removed and replaced with a

spare while the rest of the system (other repeaters) is still operating. However, the power supply of the failed

repeater should be isolated from the power before anything is replaced.

In the event of a malfunction in the system, the status of the antenna systems as well as the continuity of the

cabling should be checked before replacing any modules within the repeater.

6.2 Preventative Maintenance

The repeater does not require preventative maintenance apart from changing the battery once every three

years.

6.3 Trouble Shooting

In the event of a failure Axell Wireless’s support service should be contacted for advice on a possible module

replacement or other action to be taken.

Caution!

If a shipment of a repeater back to Axell Wireless is made within the period of

guarantee the original packing must be used.

6.4 Component Replacement

None of the modules in the repeater can be replaced without removing the repeater from its mounting and

opening the cover of the repeater.

6.5 Product Disposal

Disposal of this product must be handled according to all national laws and regulations. For detailed

information regarding materials, please refer to Axell Wireless.