User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

To end session type CTRL-Z

5.7.5.3

Manually Answering Incoming Calls

It is possible to manually answer incoming calls without involving the repeater software at all, to verify that

the remote access and the network itself works as intended. In order to verify the remote communication,

make sure to have someone stand by to dial up the repeater with a terminal emulation program, for example

HyperTerminal™.

Go in to Direct Modem Access as described earlier. When in direct access mode, ask the person standing by

to dial up the repeater.

As soon as a call is received, the text

RING

will repeatedly be displayed on the screen.

Type

ATA <enter>

This will inform the modem to answer (ATtention Answer).

When the connection is established, a connect message will be displayed including the connection speed.

Sometimes the information comes together with some miscellaneous information, such as error correction

protocols etc.

Note! Make sure the remote peer dials the Data Call number

If the voice number is dialled instead of the data number, or if the modem contains an illegal modem

initialization string, the message

NO CARRIER

will be displayed almost immediately.

Try to change the modem initialization string. The modem initialization string mainly used to configure the

remote communication is AT+CBST.

Successful modem initialization strings used by Axell Wireless includes (most common first):

AT+CBST=71,0,1;\Q3

AT+CBST=7,0,1;\Q3

AT+CBST=0,0,1;\Q3