User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

Each parameter is described in Common Commands and Attributes, section 14

GPRS Configurations.

Set the Access Point Name. It needs to be defined by the telecom operator

Set Maximum Receive Unit and maximum Transmission Unit. These differ

depending on access type: 576 for GSM, 1476 for EDGE and 1500 for WCDMA.

Click on Close, and then on “Yes”.

Wait for the modem to restart. This can take a few minutes.

When the modem settings are ready the LED turn green.

5.7.2.3

AEM Addresses

The Control Module can be configured with two different addresses (telephone numbers) to which alarms and

reports are delivered. In case the repeater cannot deliver alarms and reports to the primary address, the next

call will be made to the secondary address.