User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

recommendation is AT+CBST=71,0,1;\Q3. If remote communication cannot be

established try 7,0,1 or 0,0,1 or 7,0,3. For more information please refer to the

section on Troubleshooting Remote Communication.

Tick “Enable Automatic Modem Power Cycling” for the modem to be power

cycled once every 24 hours. Set the time at which the modem should be tested. This

function ensures that the repeater always is logged in to the network.

5.7.2.2

Modem Configuration, using GPRS

Select

“Configuration” and

“Communication”

Select GPRS

Initialization string

Connect times

AEM addressed are

set via the AEM

Configure GPRS

Select GPRS

Set the modem initialization string. This string differs between networks. Primary

recommendation is AT+CBST=71,0,1;\Q3

Tick “Enable Automatic Modem Power Cycling” for the modem to be power cycled

once every 24 hours. Set the time at which the modem should be tested. This

function ensures that the repeater always is logged in to the network.

Click on Configure…