User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

server antenna port. Log into the OMU and monitor the uplink via the RMC. This

measurement is not as accurate as alternative 1.

Note! If several repeaters are connected to the same OMU the total gain in each chain

should be slightly lower than 0dB not to insert too much noise into the BTS.

Note!

For in-depth instructions for commissioning of an OMU-Repeater system please

contact your Axell Wireless representative.

5.6.2 Set Repeater Name (TAG)

The TAG can be chosen freely to give the repeater a name that is linked to the location, the site name, etc.

The TAG may contain up to 30 characters including spaces.

Select

“Configuration” and

“Product”

Insert the repeater’s

name (TAG) in this

box.

Note! Do not assign an ID. The AEM will do this automatically when the repeater

is integrated in the AEM.

5.6.3 Configure Alarms

See section 4.4.7Alarm Configuration.