User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 80 (105)
On Modem Power is on
Off Modem Power is off
Green LED – Modem Status
On Depending on type of call:
Voice call: Connected to remote party
Data call: Connected to remote party
or exchange of parameters while
setting up or disconnecting a call
Flashing
(irregular)
Indicates GPSR data transfer. When a
GPRS transfer is in progress the LED
goes on within 1 second after data
packets were exchanged. Flash
duration in approximately 0.5s.
75ms on/75ms off/75ms on/3s off One or more GPRS contexts activated
75ms on/3s off
Logged to network (monitoring
control channels and user inRadio
Modulections). No call in progress
600ms on/600ms off
No SIM card inserted, or no PIN
entered, or network search in
progress, or ongoing user
authentications, or network login in
progress
Off Modem is off
Check the LEDs on
the Fibre Optic
Converter
The Fibre Optic Converter contains two optical alarm sources. These are alarms
for transmitted and received optical signal level. The levels of the received optical
signals can be monitored on-line via the RMC. This is convenient during
installation and tuning of the system.
There are 6 LEDs on the module to indicate the status.
P
W
R
E
R
R
U
L
D
a
t
a
D
L
D
a
t
a
O
p
t
o
R
x
O
p
t
o
T
x
LED 1, Power, Green
On Unit is powered on
Off Unit has no power
LED 2, Error, Red
On Error detected
Off No error
LED 3, UL Data, Yellow