User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

5.3 Start-up the Repeater

Caution!

Make sure the antenna cables or 50 ohm terminations are connected to the repeater’s antenna connectors

before the repeater is turned on.

Switch the repeater

Switch the repeater on by using the power switches on the power supply.

Note! See caution above!

Power Switch

There are two switches. One is for the battery and one is for the power

The rightmost switch is the one that switches the main power. The leftmost is for

turning the battery on/off.

Note! The power switch has two positions; “on” and “stand by”. In the stand by

position the repeater is still connected to the power supply but not operational.

Note! On repeaters mounted in an extended box with two power supplies, both

power supplies needs to be switched on.

Check power supply

LEDs

Check the LEDs on the Power unit to ensure that normal operation conditions

have been attained.

Input

Power

+6V +15V +28V

LED 1, Input Power, Green

Slow flash Power supply unit operating on AC or DC

OFF Power supply unit not operating

LED 2, +6V, Red

Slow flash (every 10 seconds) +6V power supply operating

Quick flash

+6V power supply not operating or operating with

malfunction

LED 3, +15V, Red

Slow flash (every 10 seconds) +15V power supply operating

Quick flash

+15V power supply not operating or operating with

malfunction

LED 4, +28V, Red

Slow flash (every 10 seconds) +28V power supply operating

Quick flash +28V power supply not operating or operating