User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

Wireless. Coaxial lightning protection is normally one of these three types: Gas capsule,

High-pass and Bandpass.

There also need to be a protective device installed on the power supply cord.

Protective device installed in connection with the power supply

5.2.5 Attach Cabling

Power Fiber inputGround Server

antenna

External

alarms

5.2.5.1

Attach Fiber Cable

This product is equipped with class 1 lasers, as per definition in EN 60825-1.

Caution

Un-terminated optical receptacles may

emit laser radiation. Do not stare into beam

or view with optical instruments.

Note!

Angled connectors, APC, need to be used throughout the whole link between

the OMU and the repeater. The angle needs to be 8 degrees.

Also the ODF connections need to be APC type.

The fibre must be monomode type.

Select fibre

Recommended fibre cable is single mode 9/125.

Connect the fibre The casing of the repeater is equipped with an inlet. The inlet is designed to go with a

corrugated hose, which is included in the shipment.

The hose, together with the rubber seal meet the protection standard IP65.