User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

Firmware Control via RMC

View the currently

installed firmware

1. Open the Firmware upload view in RMC.

In the box labeled Installed Firmware information about the currently installed

firmware is displayed.

Upload new

firmware

1. Open the Firmware upload view in RMC. In the box labeled Firmware Location

select the directory where your firmware files (ARF files) are located.

2. Select the firmware to upload from the firmware list, labeled Select new firmware

to upload. For each firmware available, there is information about version and

compatibility with the repeater you are currently connected to. Below this list there

is a box with detailed information about the selected firmware.

3. Click Start Upload. During upload a status screen displays upload progress

information while you wait. The upload takes about 10 minutes with a local

connection and 15 minutes over the GSM network.

4. Upload completed.

5. The user is logged out and the new firmware is initiated.