User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 61 (105)
4.9 User Access
Several users at a time can be logged on to a Repeater, for instance one locally via the RS232 interface and
one remotely via modem. There is one default user name and password defined for the repeater.
User Name Password
avitec AvitecPasswd
Note! Both the user name and the password are case sensitive.
The password can be changed and new accounts be added once a logon has been made. This is made in
terminal mode. Please refer to the Command and Attribute Summary.
A user will be logged out after a configurable number of minutes of inactivity. This time can be defined via
the RMC.
4.9.1 Configure Automatic Logout
Select “Configuration”
and “Communication”
Note! A password for the repeater’s communication with the AEM can be set in the box above but it is
recommended that it is done from the AEM, and NOT from here.
4.9.2 Change Username or Password
Select “Configuration”
and “Communication”
Make the changes