User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 60 (105)
During manufacturing the repeater is configured with all the serial numbers of all the devices in the system.
For passive devices, the article number of the device is added. Once the system is configured, the Control
Module polls all the active devices for article numbers and production information as well as software
versions and statistics of the active devices.
Via the RMC the full repeater inventory can be read, including statistics of the active devices.
When a login to a repeater is made using the Repeater Maintenance Console, the RMC detects the repeater
type and adjusts the user interface correspondingly. The same RMC can be used for all repeater types.
Via the RMC basic information about the repeater configuration can be monitored.
Select “Configuration”
and “Product”
General repeater
information
Hardware devices
installed
Active devices
installed
More details regarding
selected item
Control Module
information
Additional information
regarding Radio Board
and MCPA
4.8 Tag and ID
When the repeater is integrated into the Axell Element Manager the repeater is assigned a repeater ID, which
is a unique identifier in the repeater network. This ID is used by the AEM to keep track of the repeaters in the
AEM database.
The repeater Tag can be used to give the repeater a more logical name, such as the site or installation place. If
Tag is set during site installation, this can easily be read by the AEM during AEM integration, giving the
AEM operator a clear identification of the site.
The repeater tag can be locked so that the tag can not be accidentally changed from the AEM.
Refer to section 5.6.2 Set Repeater Name (TAG) for information about how to set the repeater Tag.