User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 56 (105)
Field Format
# of
char
Description
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Byte 1
Bit 3 Bit 2 Bit 1 Bit 0
Temp Radio
Unit 1
Temp Radio
Unit 2
Temp Radio
Unit 3
Temp Radio Unit
4
Byte 2
Bit 3 Bit 2 Bit 1 Bit 0
Temp MCPA 1 Temp MCPA 2 Temp MCPA 3 Temp MCPA 4
Byte 3
Bit 3 Bit 2 Bit 1 Bit 0
Temp Fibre
Optic Unit 1
Temp Fibre
Optic Unit 2
Temp Fibre
Optic Unit 3
Temp Fibre Optic
Unit 4
RXO N 1 Status of Received Optical Level
These values are Hex Coded, and should be used in conjunction with COM status for
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Bit 3 Bit 2 Bit 1 Bit 0
RXO Fibre
Optic Unit 1
RXO Fibre
Optic Unit 2
RXO Fibre
Optic Unit 3
RXO Fibre Optic
Unit 4
RXP N 1 Status of Received Pilot Tone level
These values are Hex Coded, and should be used in conjunction with COM status for
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Bit 3 Bit 2 Bit 1 Bit 0
RXP Fibre
Optic Unit 1
RXP Fibre
Optic Unit 2
RXP Fibre Optic
Unit 3
RXP Fibre Optic
Unit 4
RXQ N 1
Status of Received Data Quality If repeater is NOT a system slave, this reports as a
dash.
SZP N 1 Status of Synthesizer in Pilot Tone Generator
These values are Hex Coded, and should be used in conjunction with COM status for
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Bit 3 Bit 2 Bit 1 Bit 0
SZP Fibre Optic
Unit 1
SZP Fibre Optic
Unit 2
SZP Fibre Optic
Unit 3
SZP Fibre Optic
Unit 4
TEM N 1 Status of temperature in Controller
TXO N 1 Status of Optical Transmitter
These values are Hex Coded, and should be used in conjunction with COM status for