User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 54 (105)
Field Format
# of
char
Description
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Bit 3 Bit 2 Bit 1 Bit 0
MCPA Comm.
Chain 1
MCPA Comm.
Chain 2
MCPA Comm.
Chain 3
MCPA Comm.
Chain 4
COM
NNNNNNNNN
NNN
12 Status of communication between controller and active devices
CRC NNN 3
Status of CRC Status for target firmware. These values are Hex Coded, and should
be used in conjunction with COM status for actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Byte 1
Bit 3 Bit 2 Bit 1 Bit 0
CRC
Radio Unit 1
CRC
Radio Unit 2
CRC
Radio Unit 3
CRC
Radio Unit 4
Byte 2
Bit 3 Bit 2 Bit 1 Bit 0
CRC
Fibre Optic Unit
1
CRC
Fibre Optic Unit
2
CRC
Fibre Optic Unit
3
CRC
Fibre Optic Unit 4
Byte 3
Bit 3 Bit 2 Bit 1 Bit 0
Com Mux 0 0 0
MSC NN 2 Status of MCPA, both errors and fatal errors.
These values are Hex Coded, and should be used in conjunction with CMM status
for actual MCPA.
For example, the Byte 1 status is sent as Hex ‘A’, which is extracted to 1010.
Byte 1
Bit 3 Bit 2 Bit 1 Bit 0
Fatal Error
MCPA 1
Error MCPA 1
Fatal error
MCPA 2
Error MCPA 2
Byte 2
Bit 3 Bit 2 Bit 1 Bit 0
Fatal Error
MCPA 3
Error MCPA 3
Fatal error
MCPA 4
Error MCPA 4
PDL N 1 Status of Power Downlink Level.
These values are Hex Coded, and should be used in conjunction with COM status for
actual device.
For example, the Byte 1 status is sent as Hex ‘8’, which is extracted to 1000.
Bit 3 Bit 2 Bit 1 Bit 0
Power Level
Chain 1
Downlink
Power Level
Chain 2
Downlink
Power Level
Chain 3
Downlink
Power Level
Chain 4 Downlink