User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 49 (105)
General Alarms
 Door, DOO. Door to repeater open
 Controller Temp, TEM. Temperature in Control Module too
high or too low
 External Alarms, EX1-4. Alarm from external source
Power Supply Related Alarms
 Com, COM. Error in communication with Power Supply
 Temperature, PTM. Temperature in Power Supply too high or
too low
 Power Supply Input, PSL. Input power to the repeater too high
or too low
 Battery, BAT. Power level in battery too high or too low
 Power P1-4, PW1-4. +28VDC, +15VDC, +6,45VD and backed
up +6,45 VDC too high or too low
Reference Generator Related Alarms
 Com, COM Error in communication with module
 Power P3, PW3. Relevant power to module too high or too low
Radio Board Related Alarms
 Com, COM Error in communication with module
 Power P2-3, PW2-3 Relevant power to module too high or too
low
 Radio board temp, RBT. Temperature in Radio Board too high
or too low
 MCPA temp, RBT Temperature in MCPA too high or too low
 Radio board CRC, CRC Faulty checksum in Radio Board
 MCPA Condition, PAE Error in MCPA
 Fatal MCPA Condition, PAF Fatal error in MCPA
 MCPA Com, CMM Error in communication between the radio
board and the MCPA
Fibre Optic Converter Related Alarms
 Com, COM. Error in communication with module
 Temperature, RBT. Temperature in Fibre Optic Converter too
high or too low
 Transmitter, TXO. No detectable transmitted optical signal
 Received Level, RXO. Received optical level too low
 Pilot Tone Gen Synth, SZP. Pilot tone frequency faulty
 Re. Pilot Tone Level, RXP. Pilot tone level too high or too low
 EEPROM CRC, CRC. Faulty checksum in Fibre Optic
Converter