User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

The repeaters are closed with two hex screws,

M8.

As a complement the repeaters can be locked

with a key.

Note! The two screws must be fully tightened.

Failure to do so may affect the IP65 compliancy

and therefore any warranty.

The external connections at the bottom of the

repeater can be protected with a cover which is

screwed in place.

Screws

Connectors

Lock

The repeaters are designed to be mounted on a wall or in a 19” rack. They should always be mounted in a

vertical position with the connectors facing downwards.

3.5 Connections

All connections are placed at the bottom panel of the repeater.

Power Fiber inputGround Server

antenna

External

alarms

 Antenna connection is DIN 7/16” connector, female

 Fibre connector is SC/APC. It is placed on the fibre optic converter(s) inside the repeater

 Plinth connection for power input is described in section 5 Installation

 Plinth connector for external alarms is described in section 5 Installation

Note!

APC connectors need to be used

throughout the whole link between the OMU and the repeater.

Also all ODF connections need to be of the same type.

3.6 Building Blocks

The repeaters consist of the following main building blocks.