User Manual

MBF, Multi Band Repeater
PRODUCT DESCRIPTION AND USER'S MANUAL
© Axell Wireless Ltd A 200 93 00, rev E 104 (105)
7.3 Tri Band Repeater MBF-T-9-18-22/8-17-19
Electrical Specifications
GSM/WCDMA
850
E-GSM GSM1800 GSM/WCDMA
1900
WCDMA
2100
AWS
UL 824 – 849 MHz 880 – 915
MHz
1710 - 1785
MHz
1850 - 1910
MHz
1920 - 1980
MHz
1710-1755
MHz
DL 869 – 894 MHz 925 – 960
MHz
1805 - 1880
MHz
1930 - 1990
MHz
2110 - 2170
MHz
2110-2155
MHz
Operational
bandwidth
25MHz 35 MHz 75MHz 60 MHz 60 MHz 45MHz
Composite
Output
Power DL
+37 dBm +37 dBm* +37 dBm* +37 dBm +39 dBm
(for PAR of
8.5 dB)
+39 dBm
(for PAR of
8.5 dB)
* In repeaters that share a common downlink fibre for 900MHZ and 1800MHz a minimum of 4 carriers in
each band is required for the full composite output power to be attainable maintaining full ETSI compliance
Ripple in pass band (all bands) < 2 dB
Noise figure UL (all bands) 3 dB typical (maximum gain)
Propagation delay (all bands) < 2 µs
Modulation Accuracy at nominal output power
GSM / GMSK < 2.5 ° RMS and < 10 ° peak
EDGE / 8-PSK < 3 % EVM RMS
WCDMA/EVM < 12.5% RMS (composite according to ETSI TS 25.106
with TM 1/64 DPCH)
WCDMA/PkDCE < -33 dB (according to ETSI TS 25.106 with TM 1/64
DPCH and spreading factor 256)
Gain UL/DL (all bands) Adjustable in 1 dB steps
System Impedance 50 ohm
Return Loss at Antenna Connection > 14 dB
Antenna connectors DIN 7/16
Electrical ratings 230 VAC, 50 Hz or -48 VDC
Power Consumption 350 W