User Manual

MBF, Multi Band Repeater

PRODUCT DESCRIPTION AND USER'S MANUAL

Example of a sun shield

IP65 Casing Note! The repeater box should be closed using the two screws. The screws must be

fully tightened. Failure to do so may affect the IP65 compliancy and therefore any

warranty.

5.2.3 Ensure Proper Grounding

Connect the

grounding

protection

Ensure that good grounding protection measures are taken to create a

reliable repeater site. Make sure to use adequately dimensioned

grounding cables. The minimum recommended conductive area for a

grounding cable is 16mm

The antenna cabling should be connected to ground every 10m by a

reliable grounding kit.

Make sure the grounding product used is suitable for the kind and size

of cable being used.

Connect the repeater box bolt to the same ground.

Ground

Ground connector on repeater