User Manual

Document Name: Common Commands and Attributes v1.3.0 Revision: 1.2
10.7.2 Usage
Attribute type: Read and Write
When commissioning the repeater, the actual site ID is often of high importance,
and is normally configured by using the attribute TAF. During integration of the
repeater into the Axell Element Manager, it is possible to set the TAG from the AEM
itself. By using the attribute LTG (Lock Tag) it is possible to lock the tag from
accidently being modified.
Format:
<Locked>
where <Locked> = 0 means that it is possible to modify the tag, and <Locked> =
1 means that the Tag is locked from modification.
Example:
GET LTG
Reply:
0
means that no tag is unlocked and that it is possible to change the tag.
Example:
SET LTG 1
disables the possibility to change the tag.
10.8 MDL – Target Model Identification
10.8.1 Overview
This attribute returns a string containing the equipment type being monitored by
the controller.
10.8.2 Usage
Attribute type: Read only
The model identification string is a unique identifier indicating exactly what kind of
equipment is monitored by the controller. This information is essential for the
Repeater Maintenance Console and for the Axell Element Manager integration to
know exactly what parameters are supported by the controller.
Format:
<Model Identification String>
uniquely identifying the equipment type.
Example:
GET MDL
Reply:
CSFT922-ER
indicating that this is a Channel Selective Frequency Translating 2-channel repeater
for the 900 band of Remote type with External combining.
For a textual description of the equipment model, please refer to attribute MDD.
Note! For detailed information on the different models and their interpretation,
refer to corresponding product manual.
Common Commands and Attributes 65/123