User Manual

Axell Wireless Limited
Technical Literature
L.A. M.T.A. Remote Sites
Document Number 80-301401HBKM Issue No. 1 Date 13/06/2008 Page 23 of 148
3.3.5.6. 30dB Bi-Directional Coupler (07-022005)
The purpose of these couplers is to tap off known portions (in this case 30dB) of RF signal from
transmission lines and to combine them, for example though splitter units for different purposes
(alarms/monitoring etc.), whilst maintaining an accurate 50: load to all ports/interfaces throughout the
specified frequency range. 07-022005 is a Bi-Directional device and as such will couple 30dB of
signal whichever direction the signal is traveling.
07-022005 Specification
PARAMETER SPECIFICATION
Frequency Range 100kHz – 2.7GHz
Mainline Insertion Loss < 1.0 dB
Coupling Loss 30 dB
Coupling Loss Tolerance +/-2.0 dB
VSWR Mainline Better than 1.4:1
Impedance 50 ȍ
Power Handling (CW) 5W
Outline (W x D x H) 44.5mm x 41mm x 27mm (ex. connectors)
Connectors SMA (female) on all ports
Case Material Aluminium
Finish Iridite NCP
Operating Temperature -20 to +55°C
Ingress Protection IP54