User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

7 Monitoring, Fault Sourcing and Maintenance

BSF-3604 provides the following monitoring and fault sourcing options:

 Web GUI Home screen Advanced mode – shows general status of system and

components

 Web GUI Logs screen – provides logs of faults and operations

 Module LEDs – can be seen locally when opening the Repeater

This chapter describes these fault sourcing tools. Be sure to review the Cautions and General

Statements below.

7.1 Cautions and General Statements

 The system normally operates without any operator intervention or maintenance. If in the

unlikely event of any unit failure, the faulty repeater should be replaced. A failed unit can

be removed and replaced with a spare while the rest of the system (other repeaters) is

still operating. However, the power supply of the failed repeater should be isolated from

the power before anything is replaced.

 In the event of a malfunction in the system, the status of the antenna systems as well as

the continuity of the cabling should be checked before replacing any modules within the

repeater.

 In the event of a failure Axell Wireless’ support service should be contacted for advice on

a possible module replacement or other action to be taken.

 If a shipment of a repeater back to Axell Wireless is made within the period of guarantee

the original packing must be used.

 Component Replacement - None of the modules in the repeater can be replaced without

removing the repeater from its mounting and opening the cover of the repeater.

 Product Disposal - Disposal of this product must be handled according to all national laws

and regulations. For detailed information regarding materials, please refer to Axell

Wireless.

Please be aware that the equipment may, during certain conditions become

very warm and can cause minor injuries if handled without any protection,

such as gloves.

Risk of explosion if battery is replaced by an incorrect type. Dispose of used

batteries according to local laws and instructions.