User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

6.7 Reboot

Use this function in Emergency Cases ONLY!

To reboot the Control Module:

1. Click the Config tab.

2. Click on the Reboot icon.

3. Approve the Reboot sequence.

Figure 6-10: Reboot System

6.8 Axell Shell (Command Line Interface)

To access the Axell Shell:

1. Click on the Config button.

2. Select the Axell Shell option.

The Axell Shell button invokes the CLI screen. It is used to run some of the commands that are

currently not provided by the Web GUI (user privileges and administration) and/or for advanced

troubleshooting and configurations procedures.

All configuration and management procedures can be implemented using this interface. Please

refer to the Attribute Reference section (by clicking the Cofing button on the top right and selecting

Attribute Reference – see 0) for detailed syntax and available commands. You may also consider

viewing the BSF-3604 Commands and Attributes document.