User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

To activate the BSF-3604 SNMP Agent

1. Click on the Config button (top right corner) and select SNMP Agent Config. The following

pane appears:

2. Set the SNMP Agent toggle to ON.

3. Set the port and the Read-Only community.

4. Click Apply.

6.6 User Accounts

The BSF-3604 comes pre-configured with default usernames and passwords in various

administration levels.

At the moment, updating user accounts is available only via Command Line Interface (CLI) or Axell

Shell. See the Common Commands and Attributes v2.0.0 document for detailed commands and

syntax or click on the Help button at the top right of the Web-GUI screen.

6.6.1 Default User Accounts

User Name Default

Password

Details

axell AxellPasswd Default user name.

omcuname iwnkhoob

Axell Element Manager (AEM) user account. This

account will not generate VLI, LGO or CLR alarms.

sysadmin AxellAdmin4050

This is the system administration password which is used

for firmware upgrades and user administration.

Escalation to this level is achieved by issuing command

SYSADMIN from the user prompt.

useradmin UseradminPwd23

This account contains user administration privileges.

Escalation to this level is achieved by issuing command

USERADMIN from the user prompt.

Avitec AvitecPasswd

Account available for compatibility reasons with older

system firmware.

NOTE: It is strongly recommended to change the default user names and passwords immediately

at commissioning. This is done by using the command ACT PASSWORD. Please refer to

the User Administration section in Common Commands and Attributes document for

detailed syntax.