User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

6.4.2 Modem Setup

NOTE: This section is relevant only if a modem is installed in the system. If connecting directly via

Ethernet, see section 0.

The BSF-3604 can operate over two types of modem: Packet Switched (GPRS, GSM etc.) or

Circuit Switched (PSTN/GSM). The available options depend on the modem type installed in your

system.

Modem Setup Overview

1. Insert the SIM card in the modem SIM slot (if using a wireless modem).

2. Click the Config button and then select Remote Communication from the displayed icons.

The following dialog appears.

3. Verify that Remote Communication is ON.

4. Select the Device:Method – communication method. Select the option relevant to your

installed modem. (STD:DTC = Standard AT:Data Call, ETH:TCP = Ethernet:TCP connection)

5. Configure your communication method according to the relevant following section.

6.4.2.1 Packet Switched Modem Configuration (GSM/GPRS)

NOTE: In case network attach is not done properly (using GPRS), it is necessary to telnet, SSH or

serial into the controller and enter TRACE MODEM to see why modem is not initialized

(wrong / missing PIN, wrong APN etc).

 From the Remote communication menu, select TRM-3 GPRS.

 In the GRPS area, enter the following:

 Access Point Name – customer’s Access Point name.

 Click Apply.