User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

6.4 Remote Communication Setup

This section describes the Ethernet and modem setup. The SNMP setup option also

available in this dialog is described in section 6.5. SNMP .

Select an option (ETH TCP, Modem or SNMP) and configure. Then select the next

relevant option.

NOTE: The configuration of each option is saved and active. It is not relevant which option is

currently selected (ETH TCP, Modem or SNMP).

6.4.1 TCP/IP and Ethernet

1. Click on the Config button.

2. From Device:Method select ETH:TCP (Ethernet:TCP/IP).

3. Click Apply.

Figure 6-9: Remote ETH Configuration