User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater
Product Description and User’s Manual
© Axell Wireless Ltd Doc. No. 61-103001HBK Issue 3 50
6.3.4 IP Address
This procedure describes how to set up the IP address either manually or configure for
acquisition via DHCP (usually configured for local management options).
To configure the IP address
1. In the Main menu, click the Config button.
2. Click on Ethernet.
3. For manual IP address configuration:
 Select Manually Configure IP Address.
 Set the IP, Subnet Mask, Default Gateway and DNS addresses.
 Click Apply.
4. For DHCP IP address configuration:
 Select Automatically Obtain IP Address (DHCP).
 No other settings are required.
 Click Apply.
The Manual configuration settings are illustrated below.
Figure 6-8: Configure Local Network Parameters