User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater
Product Description and User’s Manual
© Axell Wireless Ltd Doc. No. 61-103001HBK Issue 3 49
6.3.2 Date & Time
NOTE: The date and time are automatically set from the OMU II.
Be sure to set the correct date and time in order to accurately timestamp all events
occurring on the BSF-3604.
To set the Date & Time:
1. Click the Config button.
2. Click on Date & Time.
3. Do one of the following:
 Either, enter the correct date and time according to the displayed formats.
 Or, click on Local Time to set the time according to the PC running the Web-GUI.
4. Click Apply.
Figure 6-6: Configure Date and Time
6.3.3 Configure External Alarms
It is necessary to configure any connected external alarms according to the trigger (high or
low) and it is recommended to assign the alarms recognizable names (such as Door Open,
High Temperature, etc.)
To configure the external alarms
1. In the Main menu, click the Config button.
2. Click on the External Alarms icon.
3. For each alarm:
 Set the Trigger as High or Low as required.
 Assign the alarm a recognizable description
4. Click Apply.
Figure 6-7: Configure External Alarms
Set to local time
Enter Alarm
Description
Set High/Low