User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

3. Select the bands of each remote to be adjusted (e.g. 450MHz band on Node #3)

4. Adjust the following for each band:

 Nominal Level (dBm)

 Uplink Delta (dB)

5. Click Adjust. The procedure may take several minutes depending on the number of units

selected.

5.4 Integration into the Axell Element Manager (AEM)

NOTE: All integration into the AEM is performed from the AEM side – no action is required from the

BSF-3604 side.

The AEM automatically connects to the repeater, downloads all the repeater parameters and

statuses into a database. When all parameters have been downloaded, the AEM configures the

repeater with the IP address where alarms and reports should be sent to, and optionally with a

secondary IP address where the repeater can connect to in case connection to primary IP fails.

When heartbeat reports and alarms are sent from the repeater to the AEM also the latest

information about the status and RF-configuration is included. This means that the AEM operator

always has information about the current status in the AEM database (and do not need to call the

repeater to find this out).

NOTE: Once the repeater is integrated to the AEM, all changes to the repeater should preferably

be done from the Axell Element Manager in order to ensure that the database always

contains correct information.

5.5 What Next?

The BSF-3604 unit is now ready for operation. You may monitor the unit's general status via the

OMU II Home screen and if the node is faulty (red LED), access the Home screen in Advanced

mode for more detailed information.

NOTE: Consult the OMU II User Manual for additional information on RF and Optical adjustments.