User's Manual

Axell BSF3604-490-510-DP-AC (61-103001) Repeater

Product Description and User’s Manual

2.4 Management WEB GUI

BSF-3604 is remotely commissioned and monitored via an OMU II session. Local access to the

unit is not required for commissioning.

Additional configuration and troubleshooting options are available via a direct connection to the

BSF-3604 IP address. A direct session can be opened locally or remotely.

NOTE: Direct remote communication requires connecting the BSF-3604 to an Ethernet network

and configuration of an IP address, or via GSM/GSM-R PSTN modem.

2.5 Interfaces

The BSF-3604 unit provides the following interfaces:

 Lockable door catches for protection and security

 External TX and RX antenna and GND connections

 External connection for power

 Internal connection for fiber optics and alarm cables routed via cable gland on the side of

the unit

 Internal USB/Ethernet connection for (optional) management and analysis via Web GUI

routed via cable gland on the side of the unit

2.5.1 Securing the Unit

The repeaters are secured with two, quarter-turn door catches which can be locked with a key.

NOTE: The two door catches must be fully closed and locked. Failure to do so will affect the IP65

compliancy and therefore any warranty.

Figure 2-2: Securing the Unit