User's Manual

Axell BSF3604-450-470-DP-AC (61-101001) Repeater
Product Description and User’s Manual
© Axell Wireless Ltd Doc. No. 61-101001HBK Issue 1 15
2.5.2 External Interfaces
The repeater’s external interfaces are located on the right-hand side of the unit
Figure 2-3: ports and connections
The following table provides a description of the ports and connections.
Port
Description
D/L DAS RF Port
Downlink output connection to TX Antenna – N type connector, female
U/L DAS RF Port
Uplink input connection from RX Antenna – N type connector, female
Cable Gland
The fiber optic cable link from the master site is routed through this gland.
The optional Ethernet connection for management and analysis via Web
GUI may also be routed through this gland.
Connections for routing external alarms and relay wiring cable for internal
connections (section 4.6.) are also routed through this cable gland
Power Connection
AC inlet, 3 pole panel plug (section 4.7.)
Grounding
Connection
Grounding bolt (section 4.3.)