User Manual

Axell Wireless Limited
Technical Literature
Fiber Optic, Uplink, Band Selective,
800MHz Booster Amplifier
Document Number
60
-
275001HBK
Issue No. 2
Date 13/06/2011
Page
8
of
16
3.2. Specification
Electrical Specification
Uplink Frequency Range 812.0MHZ to 816.0MHz
Passband Ripple ± 1.5dB
Uplink Power Amplifier 20W
Uplink PA IP3
+63 dBm
Uplink Output Power +23 dBm/carrier
No. of F/O ports
1 FC/APC
Gain 30-60 dB
Gain Adjust 0-30dB in 1dB Steps
VSWR 1.5:1
Impedance 50 Ohms
Uplink Noise Figure
< 6dB (at maximum gain)
AGC 30dB Dynamic Range
Power Supply
220VAC or 110VAC
Power Consumption < 300 Watts
Environmental/Mechanical
Operating Temperature -25°C to +55°C
Storage Temperature -30°C to +70°C
Cooling
Convection
Humidity 95% RHNC
Mechanical 19” rack, 8U
Dimensions W483mm x D400mm x H360mm
Weight < 25kg
RF Connectors
N
-
Type Female
Battery Back Up N/A
Alarm Interfaces
Local