User Manual

Fibre Optic Master and Remote Site
User Handbook
Document Number: 60-212701HBK - Issue No. 1 Page 9 of 50
3.2. 60-212701 Diagrams
Master Site 60-212701 Front Panel (Not to scale)
A Green LED “Power On”
B Red LED “Alarm”
C Green LED Fibre Optic Receiver 1 “Power On”
D Green LED Fibre Optic Receiver 1 “Laser On”, LED not illuminated = Alarm
E Fibre Optic Receiver 1 Gain Adjust
F Green LED Fibre Optic Receiver 2 “Power On”
G Green LED Fibre Optic Receiver 2 “Laser On”, LED not illuminated = Alarm
H Fibre Optic Receiver 2 Gain Adjust
I Green LED Fibre Optic Transmitter 1 “Power On”
J Green LED Fibre Optic Transmitter 1 “Laser On”, LED not illuminated = Alarm
K Green LED Fibre Optic Transmitter 2 “Power On”
L Green LED Fibre Optic Transmitter 2 “Laser On”, LED not illuminated = Alarm
Master Site 60-212701 Rear Panel (Not to scale)
A RX Port – Uplink RF out to antenna G Earth connection
B Fibre Optic input 2 (uplink from remote site) H Uplink Switched Attenuator
C Fibre Optic input 1 (uplink from remote site) I Downlink Switched Attenuator
D TX Port – Downlink RF in from antenna J Alarm Output
E Fibre Optic output 2 (downlink to remote site) K AC Trip Switch
F Fibre Optic output 1 (downlink to remote site) L AC input (110V)